Ameda Pumps, Parts and Accessories

Cheeky Monkey - shop online for unique maternity, baby and toddler gear

ONE-HAND PUMP HANDLE ASSEMBLY
Here's an economical way to convert the Ameda HygieniKit Milk Collection Systems into a One-Hand Breast Pump without having to buy an entirely new kit!

$26.99

WHITE VALVE
For use with the Ameda Pumps - if your valve has a tear or has been used too long the opening may be too wide - this will reduce suction and your pump will not work properly.

$6.99

Breast Flange Kit

Model # 17148: A proper fitting breast flange can make all the difference between continuing to breastfeed and early weaning. The Ameda Custom Flanges with inserts should be used when a standard sized flange is too small for comfortable pumping. This product provides mothers with a larger flange and special reducing inserts to create an “in-between” size…larger than our standard HygieniKit Flange, but smaller than the Custom Flange alone!

$19.99

NIPPLE SHIELDS
This ultra-thin, flexible silicone shield is designed to encourage a baby’s latch on to your breast, and may help bottle-fed babies return to breastfeeding. One each.

* Only for short-term use under the guidance of a healthcare professional
* In special cases, this shield may help cushion sore or sensitive nipples

$9.99

BREAST SHELLS
Ameda breast shells protect nipples and help prevent soreness and irritation.

* Simultaneously allows for air circulation and preventing drip milk from leaking onto clothing when used with cotton rolls
* May also be used to help draw out inverted nipples
* Each box of Ameda Breast Shells (17231) contains two aerated shells and two sets of backs, one pair for sore nipples and one for inverted nipples
* Breast shell system (17233) contains two aerated shells, two sets of backs, ten cotton roll inserts and six adhesive-backed comfort pads
* Absorbent Cotton Roll Refill (17236) contains 24 rolls per box
* Comfort Pad Refill (17238) contains 10 pads per box

$19.99

SILICONE DIAPHRAGM
For use with the Ameda HygieniKit

$8.99

Single Hygienikit

-All kits are without BPA
- Milk purity is protected by the HygieniKit's patented silicone barrier design.
- Easy to use for single pumping with any Ameda electric breast pump.
- Preassembled and redy-to-use in convenient sterile packaging.

$35.99

Dual Hygienikit

-All Kits are without BPA
- Milk purity is protected by the HygieniKit's patented silicone barrier design.
- Use with any Ameda electric breast pump for easy double pumping; or convert to single pumping.
- Preassembled and redy-to-use in convinent sterile packaging.

$63.99

MOTHERS MILK FREEZER BAGS
These multi-ply sterile freezer bags resist splitting or cracking during freezing. They keep out odors and help you maximize freezer space. Includes sealing ties and clip. 20 bags per box.

$23.99

TROUBLESHOOTING TIPS - Below is a list of troubleshooting tips.

Troubleshooting the Purely Yours Pump

Problem: Interruption of Electrical Service
Solution: Unplug the AC adapter cord from the electrical outlet, wait a few seconds, then plug the AC adapter cord back into the electrical outlet.

Problem: Decreased Suction
Solution: Remove the tubing and white connector from the side of the pump and place a finger over the pump outlet. If you feel suction, the pump is operating properly, but the collection kit may not be correctly assembled or the white valve may be damaged. If no suction is felt on your finger, try unplugging the adapter from the electrical outlet, wait a few seconds, and plug it back into the electrical outlet.
Solution 2: Make sure the collection kit is properly assembled.
Solution 3: Inspect the white valve for a tear or pinhole. This component is critical to achieving proper suction. Replace the white valve with one of the spare valves provided with the product.
Solution 4: Check the tubing adapter on the side of the pump to make sure it is closed when single pumping. If open, close the adapter.
Troubleshooting the One-Hand Pump
Problem: Milk does not drip into the collection bottle.
Solution: Release the handle and the milk will begin to drip into the bottle.

Problem: Milk flow is too rapid for the pump to handle.
Solution: Release the handle a few extra times.

Problem: The pump does not seem to have enough suction.
Solution: Check the white valve. If it has a tear or hole, it needs to be replaced. Contact your local Ameda retailer to purchase additional spare valves (part #402326).

Problem: Suction has diminished.
Solution: Remove the piston seal and stretch the outer lip using fingers and thumbs, or place the seal open side down on a flat surface and push down on it. Repeat twice. Reassemble the pump. Suction should be restored and you can continue pumping.